Menu Products
Vturn-A16/A20 Horizontal Turning Lathe

Horizontal Turning Center

Vturn-A16/A20

Latest technology built-in spindle (also called DDS- Direct Drive Spindle) is included as standard, Victor Taichung's new A-series lathe features utmost part surface finish quality and highest angular accuracy through her own turret built in-house.
Available with C-axis, Y-axis and subpsindle

ITEM \ MODEL   Unit Vturn-A16 (SV)
Vturn-A20 (SV)
Vturn-A16CV (SCV)
Vturn-A20CV (SCV)
Vturn-A16YCV (YSCV)
Vturn-A20YCV (YSCV)
Capacity Swing over bed mm 720 (700 limited by front door) 720 (700 limited by front door) 720 (700 limited by front door)
Swing over carriag mm 550 550 550
Between centers mm 630 630 630
Max. turning dia. mm 390 330 300
Std. Turning dia. mm 320 (264) 270 (264) 264
Bar capacity mm 40
52 (opt. 66, 75)
40
52 (opt. 66, 75)
40
52 (opt. 66, 75)
Travels X axis stroke mm 195+25 (165+35) 135+115 (165+35) 150+35
Z axis stroke mm 600 600 600
B axis stroke mm - (550) - (550) - (550)
Y axis stroke mm - - ±45
Spindle Max. spindle speed rpm 6000
5000
6000
5000
6000
5000
Spindle nose (chuck) in A2-5 (6")
A2-6 (8")
A2-5 (6")
A2-6 (8")
A2-5 (6")
A2-6 (8")
Spindle bore mm 52
62
52
62
52
62
Bearing inside dia. mm 90
100
90
100
90
100
Sub-spindle
(B-axis)
Max. spindle speed rpm 7000 7000 7000
Spindle nose (chuck) in A2-5 (5") A2-5 (5") A2-5 (5")
Bearing inside diameter mm 75 75 75
Spindle bore mm 41 41 41
Bar capacity mm 33 33 33
Turret No. of tools no. 12 12 12
No. of live tools no. - 12 (DIN-5480) 12 (DIN-5480)
Tool shank size mm 20 (opt. 25) 20 (opt. 25) 20 (opt. 25)
Max. boring bar dia. mm 32 (VDI-30) VDI-30(opt.VDI-40) VDI-30
Exchange time (T-T) sec 0.3 0.3 0.3
Exchange time
(including disk up & down)
  1.05 (Adjacent)
1.44 (opposite)
1.05 (Adjacent)
1.44 (opposite)
1.05 (Adjacent)
1.44 (opposite)
Milling speed   - 3000 (4000) 4000
Tailstock Quill dia. mm 75 75 75
Quill taper   MT#4 MT#4 MT#4
Quill stroke mm 80 80 80
Feedrate Rapid feedrate m/min X/Z:24/24 (B: 15) X/Z:24/24 (B:15) X/Z: 24/24, Y:10 (B: 15)
Cutting feedrate mm/min X/Z=0~1260 X/Z=0~1260 X/Z=0~1260
Motor Spindle motor kW 11/18.5(15%)
11/15(opt. 15/22 LSB)
11/18.5(15%)
11/15(opt. 15/22 LSB)
11/18.5(15%)
11/15(opt. 15/22 LSB)
Sub-spindle motor kW Bil112M-10/15 Bil112M-10/15 αBil112M-10/15
Feed servo motor kW X:3, Z:3 (B:3) X:3, Z:3 (B:3) X:4, Z:4, Y:3 (B:3)
Milling motor kW   4.5 4.5
Coolant Tank capacity L 290 290 290
Controller FANUC   0i-TD 0i-TD 0i-TF
Machine Power requirement kVA 26 (27)
30 (31)
27 (39)
28 (40)
28 (44)
33 (45)
L × W × H
(with chip conveyor)
mm 4248 x 1752 x 1998 4248 x 1752 x 1998 4248 x 1792 x 2258
Net weight kg 6300 (6500)
6400 (6600)
6300 (6500)
6400 (6600)
6600 (6800)
6700 (6900)
※Machine and controller specifications are subject to change without notice.