Vertical Machining Centers
Vcenter-M106
- Travels(X/Y/Z):1060/700/700mm
- Rapid feeds:32/32/32 m/min
- SIEMENS SINUMERIK 828D (10.4”) control
- BBT- 40/ 15000rpm spindle/23.25kw
- Roller type linear motion guideways
- Grease lubrications
- Screw chip removers included
Features
Specification
ITEM | Unit | Vcenter-M106 | |
---|---|---|---|
Travel | X axis travel | mm | 1060 |
Y axis travel | mm | 700 | |
Z axis travel | mm | 700 | |
Distance | Spindle center to column | mm | 792 |
Spindle nose to table surface | mm | 160 ~ 860 | |
Table | Table work area | mm | 1120 x 520 |
Dimension of T-slot | mm | 5 x 18 x 100 | |
Max. table load | kg | 700 | |
Spindle | Spindle taper | BBT-40 | |
Spindle motor – cont/60%/25% (Siemens motor 1PH8107) | kW | 13.5/16.2/23.25 (oil cooling) |
|
Spindle speed | rpm | 15000 (opt. 18000) | |
Feed rate | Rapid feed rate - X/Y/Z | m/min | 32 / 32 / 32 |
Axis acceleration – X/Y/Z | m/sec2 | 0.5G / 0.5G / 0.5G | |
Axis feed motor - X/Y/Z | kW | 5.5 / 7.1 / 5.5 | |
Cutting feedrate by table | m/min | 20 | |
X/Y/Z ballscrew (dia. x pitch) | mm | 45 x P16 (X/Z), 40 x P16 (Y) |
|
Linear guide width (X/Y/Z) | mm | 35 / 45 / 45 | |
Tools | Max. tool length | mm | 300 |
Max. tool weight | kg | 7 | |
Magazine capacity | 24 (opt. 30, 40) | ||
Max. tool diameter (without adjacent tools) |
mm | 75 (150) | |
Tool exchange time | sec. | 2.2 (T-T), 7.0 (C-C) | |
Pull stud angle | deg. | 15 (JIS 40P) | |
Tool selection method | Random | ||
Accuracy (ISO 230-2) | Positioning accuracy (bi-directional) | mm | 0.010 |
Repeatability | mm | 0.007 (±0.0035) | |
Machine | Power requirement | kVA | 33 (excl. CTS) |
Min/Max. air pressure | kg/cm2 | 5.5 ~ 6.5 | |
Coolant tank capacity | L. | 270 | |
Std. NC controller | SINUMERIK 828D (10.4”) | ||
Floor space requirement | mm | 3733 x 3150 | |
Max. machine height | mm | 3041 | |
Machine weight | kg | 8375 |