Menu Products
Vertical Machining Centers VCENTER-102E

VsP-60 Tons / VsP-90 Tons / VsP-120 Tons / VsP-150 Tons / VsP-180 Tons / VsP-220 Tons / VsP-260 Tons

VsP-Series (CE) - All model (Euromap Platen Information)

Model
VsP-60
Injection Unit
Injection unit size S K
Screw Diameter mm 22 25 28 32 36
Calculated Injection Capacity com3 38 49 62 80 102
Actual Shot weight-PS g 36 46 58 75 95
  oz 1.3 1.6 2.0 2.7 3.4
Actual Plasticzing Capacity-PS g/s 5.55 8.05 10.00 14.44 19.72
Actual Plasticzing Capacity-PS kg/hr 20.00 29.00 36.00 52.00 71.00
Injection Pressure-Max. kgf/com2 2500 2333 2500 2017 1594
Injection rate com3/sec 52 67 83 109 138
Calculated Injection Speed-Max. mm/sec 136 136
L/D ratio   22.7 20 22.9 20 17.8
Screw Speed rpm 400 375
Screw stroke mm 100 100
Calculated Nozzle contact force ton 5 5
Total Heating wattage kw 7.2 10.35
Clamping unit
Clamping Force ton 60
Tie-Bar distance (HxV) mm 310 x 310
thickness Min. - Max. mm 150 - 320
Clamp stroke-Max. mm 270
Open daylight-Max. mm 590
Platen dimensions (HxV) mm 490 x 460
Ejector stroke mm 80
Ejector force ton 4
Dry. Cycle time sec. 2.6
General
Motor (Standard) HP/ (Kw) 20 / (15)
Servo Motor Pump (ES Option) kw 16(M)/18.5(D)
Oil tank capacity l 135
Hydraulic sys. Pressure kgf/com2 170
Machine weight ton 2.3
Machine size (LxWxH) mm 3876 x 1095 x 1918
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-90
Injection Unit
Injection unit size S K M
Screw Diameter mm 22 25 28 32 36 32 36 40
Calculated Injection Capacity com3 38 49 62 80 102 117 148 182
Actual Shot weight-PS g 36 46 58 75 95 109 138 171
  oz 1.3 1.6 2.0 2.7 3.4 3.8 4.9 6.0
Actual Plasticzing Capacity-PS g/s 5.55 8.05 10.00 14.44 19.72 11.11 15.00 20.00
Actual Plasticzing Capacity-PS kg/hr 20.00 29.00 36.00 52.00 71.00 40.00 54.00 72.00
Injection Pressure-Max. kgf/com2 2500 2333 2500 2017 1594 2490 1968 1594
Injection rate com3/sec 64 83 104 136 172 110 140 172
Calculated Injection Speed-Max. mm/sec 169 169 137
L/D ratio   22.7 20 22.9 20 17.8 22.5 20 18
Screw Speed rpm 400 375 285
Screw stroke mm 100 100 145
Calculated Nozzle contact force ton 5 5 5
Total Heating wattage kw 7.2 10.35 11.43
Clamping unit
Clamping Force ton 90
Tie-Bar distance (HxV) mm 360 x 360
thickness Min. - Max. mm 150 - 350
Clamp stroke-Max. mm 320
Open daylight-Max. mm 670
Platen dimensions (HxV) mm 560 x 540
Ejector stroke mm 100
Ejector force ton 4
Dry. Cycle time sec. 2.5
General
Motor (Standard) HP/ (Kw) 25 / (18.5)
Servo Motor Pump (ES Option) kw 16(M)/22(D)
Oil tank capacity l 185
Hydraulic sys. Pressure kgf/com2 170
Machine weight ton 2.9
Machine size (LxWxH) mm 4122 x 1265 x 1928
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-120
Injection Unit
Injection unit size K M
Screw Diameter mm 28 32 36 32 36 40
Calculated Injection Capacity com3 62 80 102 117 148 182
Actual Shot weight-PS g 58 75 95 109 138 171
  oz 2.0 2.7 3.4 3.8 4.9 6.0
Actual Plasticzing Capacity-PS g/s 10.00 14.44 19.72 11.11 15.00 20.00
Actual Plasticzing Capacity-PS kg/hr 36.00 52.00 71.00 40.00 54.00 72.00
Injection Pressure-Max. kgf/com2 2500 2017 1594 2490 1968 1594
Injection rate com3/sec 104 136 172 110 140 172
Calculated Injection Speed-Max. mm/sec 169 131
L/D ratio   22.9 20 17.8 22.5 20 18
Screw Speed rpm 375 285
Screw stroke mm 100 145
Calculated Nozzle contact force ton 5 5
Total Heating wattage kw 10.35 11.43
Clamping unit
Clamping Force ton 120
Tie-Bar distance (HxV) mm 410 x 410
thickness Min. - Max. mm 150 - 430
Clamp stroke-Max. mm 360
Open daylight-Max. mm 790
Platen dimensions (HxV) mm 600 x 580
Ejector stroke mm 100
Ejector force ton 4
Dry. Cycle time sec. 3.2
General
Motor (Standard) HP/ (Kw) 25 / (18.5)
Servo Motor Pump (ES Option) kw 16(M)/22(D)
Oil tank capacity l 190
Hydraulic sys. Pressure kgf/com2 170
Machine weight ton 3.4
Machine size (LxWxH) mm 4348 x 1231 x 2000
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-150
Injection Unit
Injection unit size M G
Screw Diameter mm 32 36 40 36 40 46
Calculated Injection Capacity com3 117 148 182 163 201 266
Actual Shot weight-PS g 109 138 171 153 188 249
  oz 3.8 4.9 6.0 5.4 6.6 8.8
Actual Plasticzing Capacity-PS g/s 13.61 18.88 25.00 16.11 21.38 31.66
Actual Plasticzing Capacity-PS kg/hr 49.00 68.00 90.00 58.00 77.00 114.00
Injection Pressure-Max. kgf/com2 2490 1968 1594 2428 1967 1487
Injection rate com3/sec 138 175 216 141 175 231
Calculated Injection Speed-Max. mm/sec 172 139
L/D ratio   22.5 20 18 22.2 20 17.4
Screw Speed rpm 357 305
Screw stroke mm 145 160
Calculated Nozzle contact force ton 5 5
Total Heating wattage kw 11.43 13.9
Clamping unit
Clamping Force ton 150
Tie-Bar distance (HxV) mm 460 x 460
thickness Min. - Max. mm 150 - 450
Clamp stroke-Max. mm 400
Open daylight-Max. mm 850
Platen dimensions (HxV) mm 690 x 660
Ejector stroke mm 100
Ejector force ton 4
Dry. Cycle time sec. 3.1
General
Motor (Standard) HP/ (Kw) 30 / (22)
Servo Motor Pump (ES Option) kw 20(M)/30(D)
Oil tank capacity l 190
Hydraulic sys. Pressure kgf/com2 170
Machine weight ton 4
Machine size (LxWxH) mm 4466 x 1280 x 2072
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-180
Injection Unit
Injection unit size G F
Screw Diameter mm 36 40 46 46 50 55
Calculated Injection Capacity com3 163 201 266 332 393 475
Actual Shot weight-PS g 153 188 249 312 368 445
  oz 5.4 6.6 8.8 11.0 13.0 15.7
Actual Plasticzing Capacity-PS g/s 20.55 27.50 40.27 26.94 33.61 41.66
Actual Plasticzing Capacity-PS kg/hr 74.00 99.00 145.00 97.00 121.00 150.00
Injection Pressure-Max. kgf/com2 2428 1967 1487 2250 1904 1574
Injection rate com3/sec 181 224 296 195 231 279
Calculated Injection Speed-Max. mm/sec 178 118
L/D ratio   22.2 20 17.4 21.7 20 18.2
Screw Speed rpm 391 261
Screw stroke mm 160 200
Calculated Nozzle contact force ton 5 5
Total Heating wattage kw 13.9 22.6
Clamping unit
Clamping Force ton 180
Tie-Bar distance (HxV) mm 510 x 510
thickness Min. - Max. mm 200 - 550
Clamp stroke-Max. mm 470
Open daylight-Max. mm 1020
Platen dimensions (HxV) mm 750 x 724
Ejector stroke mm 140
Ejector force ton 5.6
Dry. Cycle time sec. 3.3
General
Motor (Standard) HP/ (Kw) 40 / (30)
Servo Motor Pump (ES Option) kw 20(M)/37(D)
Oil tank capacity l 280
Hydraulic sys. Pressure kgf/com2 170
Machine weight ton 5.4
Machine size (LxWxH) mm 5268 x 1487 x 2289
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-220
Injection Unit
Injection unit size G F
Screw Diameter mm 36 40 46 46 50 55
Calculated Injection Capacity com3 163 201 266 332 393 475
Actual Shot weight-PS g 153 188 249 312 368 445
  oz 5.4 6.6 8.8 11.0 13.0 15.7
Actual Plasticzing Capacity-PS g/s 20.55 27.50 40.27 26.94 33.61 41.66
Actual Plasticzing Capacity-PS kg/hr 74.00 99.00 145.00 97.00 121.00 150.00
Injection Pressure-Max. kgf/com2 2428 1967 1487 2250 1904 1574
Injection rate com3/sec 181 224 296 195 231 279
Calculated Injection Speed-Max. mm/sec 178 118
L/D ratio   22.2 20 17.4 21.7 20 18.2
Screw Speed rpm 391 261
Screw stroke mm 160 200
Calculated Nozzle contact force ton 5 5
Total Heating wattage kw 13.9 22.6
Clamping unit
Clamping Force ton 220
Tie-Bar distance (HxV) mm 560 x 560
thickness Min. - Max. mm 200 - 600
Clamp stroke-Max. mm 510
Open daylight-Max. mm 1110
Platen dimensions (HxV) mm 795 x 779
Ejector stroke mm 150
Ejector force ton 5.6
Dry. Cycle time sec. 3.5
General
Motor (Standard) HP/ (Kw) 40 / (30)
Servo Motor Pump (ES Option) kw 20(M)/37(D)
Oil tank capacity l 280
Hydraulic sys. Pressure kgf/com2 170
Machine weight ton 6.2
Machine size (LxWxH) mm 5548 x 1497 x 2349
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-260
Injection Unit
Injection unit size F E
Screw Diameter mm 46 50 55 55 60 68
Calculated Injection Capacity com3 332 393 475 570 679 872
Actual Shot weight-PS g 312 368 445 534 636 817
  oz 11.0 13.0 15.7 18.8 22.4 28.8
Actual Plasticzing Capacity-PS g/s 33.88 41.94 52.22 31.66 39.44 52.77
Actual Plasticzing Capacity-PS kg/hr 122.00 151.00 188.00 114.00 142.00 190.00
Injection Pressure-Max. kgf/com2 2250 1904 1574 2065 1735 1351
Injection rate com3/sec 244 289 349 266 317 407
Calculated Injection Speed-Max. mm/sec 147 112
L/D ratio   21.7 20 18.2 21.8 20 17.6
Screw Speed rpm 327 198
Screw stroke mm 200 240
Calculated Nozzle contact force ton 5 7.9
Total Heating wattage kw 22.6 33.23
Clamping unit
Clamping Force ton 260
Tie-Bar distance (HxV) mm 615 x 615
thickness Min. - Max. mm 250 - 650
Clamp stroke-Max. mm 580
Open daylight-Max. mm 1230
Platen dimensions (HxV) mm 890 x 860
Ejector stroke mm 170
Ejector force ton 8.5
Dry. Cycle time sec. 3.5
General
Motor (Standard) HP/ (Kw) 50 / (37)
Servo Motor Pump (ES Option) kw 16+16(M)/22+22(D)
Oil tank capacity l 350
Hydraulic sys. Pressure kgf/com2 170
Machine weight ton 9.3
Machine size (LxWxH) mm 6330 x 1582 x 2388
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP-Series (CE) - All model (SPI Platen Information)

Model
VsP-60
Injection Unit
Injection unit size   S K
Screw Diameter in 0.86 0.98 1.1 1.25 1.41
Calculated Injection Capacity in³ 2.31 2.99 3.78 4.88 6.22
Actual Shot weight-PS g 36 46 58 75 95
  oz 1.3 1.6 2.0 2.7 3.4
Actual Plasticzing Capacity-PS g/s 5.55 8.05 10.00 14.44 19.72
Actual Plasticzing Capacity-PS kg/hr 20.00 29.00 36.00 52.00 71.00
Injection Pressure-Max. Psi 35557 33168 35557 28687 22671
Injection rate in³/sec 3.17 4.08 5.06 6.65 8.42
Calculated Injection Speed-Max. in/sec 5.35 5.35
L/D ratio   22.7 20 22.9 20 17.8
Screw Speed rpm 400 375
Screw stroke in 3.937 3.937
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 7.2 10.35
Clamping unit
Clamping Force U.S. ton 66.1
Tie-Bar distance (HxV) in 12.2 x 12.2
Mold thickness Min. - Max. in 5.9 - 12.59
Clamp stroke-Max. in 10.629
Open daylight-Max. in 23.228
Platen dimensions (HxV) in 19.2 x 18.1
Ejector stroke in 3.149
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 2.6
General
Motor (Standard) HP/ (kw) 20 / (15)
Servo Motor Pump (YUKEN ES) kw 16(M)/18.5(D)
Oil tank capacity L 150
Hydraulic sys. Pressure Psi 2417
Machine weight  U.S. ton 2.535
Machine size (LxWxH) in 152.59 x 43.11 x 75.51
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-90
Injection Unit
Injection unit size  S K M
Screw Diameter in 0.86 0.98 1.1 1.25 1.41 1.25 1.41 1.57
Calculated Injection Capacity in³ 2.31 2.99 3.78 4.88 6.22 7.14 9.03 11.1
Actual Shot weight-PS g 36 46 58 75 95 109 138 171
  oz 1.3 1.6 2.0 2.7 3.4 3.8 4.9 6.0
Actual Plasticzing Capacity-PS g/s 5.55 8.05 10.00 14.44 19.72 11.11 15.00 20.00
Actual Plasticzing Capacity-PS kg/hr 20.00 29.00 36.00 52.00 71.00 40.00 54.00 72.00
Injection Pressure-Max. Psi 35557 33168 35557 28687 22671 35415 27976 22657
Injection rate in³/sec 3.90 5.06 6.34 8.29 10.49 6.71 8.54 10.49
Calculated Injection Speed-Max. in/sec 6.65 6.65 5.39
L/D ratio   22.7 20 22.9 20 17.8 22.5 20 18
Screw Speed rpm 400 375 285
Screw stroke in 3.937 3.937 5.7
Calculated Nozzle contact force U.S. ton 5.5 5.5 5.5
Total Heating wattage kw 7.2 10.35 11.43
Clamping unit
Clamping Force U.S. ton 99.2
Tie-Bar distance (HxV) in 14.1 x 14.1
Mold thickness Min. - Max. in 5.9 - 13.77
Clamp stroke-Max. in 12.598
Open daylight-Max. in 26.377
Platen dimensions (HxV) in 22.0 x 21.2
Ejector stroke in 3.937
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 2.5
General
Motor (Standard) HP/ (kw) 25 / (18.5)
Servo Motor Pump (YUKEN ES) kw 16(M)/22(D)
Oil tank capacity L 165
Hydraulic sys. Pressure Psi 2417
Machine weight  U.S. ton 3.086
Machine size (LxWxH) in 162.28 x 49.8 x 75.91
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-120
Injection Unit
Injection unit size  K M
Screw Diameter in 1.1 1.25 1.41 1.25 1.41 1.57
Calculated Injection Capacity in³ 3.78 4.88 6.22 7.14 9.03 11.1
Actual Shot weight-PS g 58 75 95 109 138 171
  oz 2.0 2.7 3.4 3.8 4.9 6.0
Actual Plasticzing Capacity-PS g/s 10.00 14.44 19.72 11.11 15.00 20.00
Actual Plasticzing Capacity-PS kg/hr 36.00 52.00 71.00 40.00 54.00 72.00
Injection Pressure-Max. Psi 35557 28687 22671 35415 27976 22657
Injection rate in³/sec 6.34 8.29 10.49 6.71 8.54 10.49
Calculated Injection Speed-Max. in/sec 6.65 5.15
L/D ratio   22.9 20 17.8 22.5 20 18
Screw Speed rpm 375 285
Screw stroke in 3.937 5.708
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 10.35 11.43
Clamping unit
Clamping Force U.S. ton 132.2
Tie-Bar distance (HxV) in 16.1 x 16.1
Mold thickness Min. - Max. in 5.9 - 16.92
Clamp stroke-Max. in 14.173
Open daylight-Max. in 31.102
Platen dimensions (HxV) in 23.6 x 22.8
Ejector stroke in 3.937
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 3.2
General
Motor (Standard) HP/ (kw) 25 / (18.5)
Servo Motor Pump (YUKEN ES) kw 16(M)/22(D)
Oil tank capacity L 165
Hydraulic sys. Pressure Psi 2417
Machine weight  U.S. ton 3.747
Machine size (LxWxH) in 171.18 x 48.46 x 78.74
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-150
Injection Unit
Injection unit size  M G
Screw Diameter in 1.25 1.41 1.57 1.41 1.57 1.81
Calculated Injection Capacity in³ 7.14 9.03 11.1 9.94 12.2 16.2
Actual Shot weight-PS g 109 138 171 153 188 249
  oz 3.8 4.9 6.0 5.4 6.6 8.8
Actual Plasticzing Capacity-PS g/s 13.61 18.88 25.00 16.11 21.38 31.66
Actual Plasticzing Capacity-PS kg/hr 49.00 68.00 90.00 58.00 77.00 114.00
Injection Pressure-Max. Psi 35415 27976 22657 30949 27976 21149
Injection rate in³/sec 8.42 10.67 13.18 8.60 10.67 14.09
Calculated Injection Speed-Max. in/sec 6.77 5.47
L/D ratio   22.5 20 18 22.2 20 17.4
Screw Speed rpm 357 305
Screw stroke in 5.708 6.299
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 11.43 13.9
Clamping unit
Clamping Force U.S. ton 165.3
Tie-Bar distance (HxV) in 18.1 x 18.1
Mold thickness Min. - Max. in 5.9 - 17.71
Clamp stroke-Max. in 15.748
Open daylight-Max. in 33.464
Platen dimensions (HxV) in 27.1 x 25.98
Ejector stroke in 3.937
Ejector force U.S. ton 4.409
Dry. Cycle time sec. 3.1
General
Motor (Standard) HP/ (kw) 30 / (22)
Servo Motor Pump (YUKEN ES) kw 20(M)/30(D)
Oil tank capacity L 215
Hydraulic sys. Pressure Psi 2417
Machine weight  U.S. ton 4.409
Machine size (LxWxH) in 175.82 x 50.39 x 81.57
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-180
Injection Unit
Injection unit size  G F
Screw Diameter in 14.1 1.57 1.81 1.81 1.96 2.16
Calculated Injection Capacity in³ 9.94 12.2 16.2 20.2 23.9 28.9
Actual Shot weight-PS g 153 188 249 312 368 445
  oz 5.4 6.6 8.8 11.0 13.0 15.7
Actual Plasticzing Capacity-PS g/s 20.55 27.50 40.27 26.94 33.61 41.66
Actual Plasticzing Capacity-PS kg/hr 74.00 99.00 145.00 97.00 121.00 150.00
Injection Pressure-Max. Psi 30991 27976 21149 32001 27080 22387
Injection rate in³/sec 11.04 13.67 18.06 11.90 14.09 17.02
Calculated Injection Speed-Max. in/sec 7 4.64
L/D ratio   22.2 20 17.4 21.7 20 18.2
Screw Speed rpm 391 261
Screw stroke in 6.299 7.874
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 13.9 22.6
Clamping unit
Clamping Force U.S. ton 198.4
Tie-Bar distance (HxV) in 20 x 20
Mold thickness Min. - Max. in 7.87 - 21.65
Clamp stroke-Max. in 18.503
Open daylight-Max. in 40.157
Platen dimensions (HxV) in 29.52 x 28.5
Ejector stroke in 5.511
Ejector force U.S. ton 6.172
Dry. Cycle time sec. 3.3
General
Motor (Standard) HP/ (kw) 40 / (30)
Servo Motor Pump (YUKEN ES) kw 20(M)/37(D)
Oil tank capacity L 245
Hydraulic sys. Pressure Psi 2417
Machine weight  U.S. ton 5.952
Machine size (LxWxH) in 207.4 x 58.54 x 90.11
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-220
Injection Unit
Injection unit size  G F
Screw Diameter in 1.41 1.57 1.81 1.81 1.96 2.16
Calculated Injection Capacity in³ 9.94 12.2 16.2 20.2 23.9 28.9
Actual Shot weight-PS g 153 188 249 312 368 445
  oz 5.4 6.6 8.8 11.0 13.0 15.7
Actual Plasticzing Capacity-PS g/s 20.55 27.50 40.27 26.94 33.61 41.66
Actual Plasticzing Capacity-PS kg/hr 74.00 99.00 145.00 97.00 121.00 150.00
Injection Pressure-Max. Psi 30991 27976 21149 32001 27080 22387
Injection rate in³/sec 11.04 13.67 18.06 11.90 14.09 17.02
Calculated Injection Speed-Max. in/sec 7 4.64
L/D ratio   22.2 20 17.4 21.7 20 18.2
Screw Speed rpm 391 261
Screw stroke in 6.299 7.874
Calculated Nozzle contact force U.S. ton 5.5 5.5
Total Heating wattage kw 13.9 22.6
Clamping unit
Clamping Force U.S. ton 242.5
Tie-Bar distance (HxV) in 22 x 22
Mold thickness Min. - Max. in 7.87 - 23.62
Clamp stroke-Max. in 20.078
Open daylight-Max. in 43.7
Platen dimensions (HxV) in 31.29 x 30.66
Ejector stroke in 5.905
Ejector force U.S. ton 6.172
Dry. Cycle time sec. 3.5
General
Motor (Standard) HP/ (kw) 40 / (30)
Servo Motor Pump (YUKEN ES) kw 20(M)/37(D)
Oil tank capacity L 245
Hydraulic sys. Pressure Psi 2417
Machine weight  U.S. ton 6.834
Machine size (LxWxH) in 218.42 x 58.93 x 92.48
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.
Model
VsP-260
Injection Unit
Injection unit size  F E
Screw Diameter in 1.81 1.96 2.16 2.16 2.36 2.67
Calculated Injection Capacity in³ 20.2 23.9 28.9 34.7 41.4 53.2
Actual Shot weight-PS g 312 368 445 534 636 817
  oz 11.0 13.0 15.7 18.8 22.4 28.8
Actual Plasticzing Capacity-PS g/s 33.88 41.94 52.22 31.66 39.44 52.77
Actual Plasticzing Capacity-PS kg/hr 122.00 151.00 188.00 114.00 142.00 190.00
Injection Pressure-Max. Psi 32001 27080 22387 29370 24676 19215
Injection rate in³/sec 14.89 17.63 21.29 16.23 19.34 24.83
Calculated Injection Speed-Max. in/sec 5.78 4.4
L/D ratio   21.7 20 18.2 21.8 20 17.6
Screw Speed rpm 327 198
Screw stroke in 7.874 9.448
Calculated Nozzle contact force U.S. ton 5.5 8.7
Total Heating wattage kw 22.6 33.23
Clamping unit
Clamping Force U.S. ton 286.5
Tie-Bar distance (HxV) in 24.2 x 24.2
Mold thickness Min. - Max. in 9.84 - 25.59
Clamp stroke-Max. in 22.834
Open daylight-Max. in 48.425
Platen dimensions (HxV) in 35.03 x 33.85
Ejector stroke in 6.692
Ejector force U.S. ton 9.369
Dry. Cycle time sec. 3.5
General
Motor (Standard) HP/ (kw) 50 / (37)
Servo Motor Pump (YUKEN ES) kw 16+16(M)/22+22(D)
Oil tank capacity L 450
Hydraulic sys. Pressure Psi 2417
Machine weight  U.S. ton 10.251
Machine size (LxWxH) in 249.21 x 62.28 x 94.01
※ Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice.

VsP Series

VsP-180

Inquiries