Metric Specification
Model (Euromap Platen Information) |
VαIII-50C |
||||
---|---|---|---|---|---|
Injection unit | |||||
Screw dia. | mm | 22 | 26 | ||
Calculated Injection Capacity | cm3 | 34 | 48 | ||
Actual Shot weight - (PS) | g | 32 | 45 | ||
oz | 1.1 | 1.6 | |||
Plastizing capacity | g/s | 5.1 | 8.0 | ||
Screw L/D ratio | m/m | 23.6 | 20 | ||
MIRLE system | Standard | Injection rate | cm3/s | 114 | 159 |
Injection speed | mm/sec | 300 | |||
Long holding type | Injection rate | cm3/s | 65 | 90 | |
Injection speed | mm/sec | 170 | |||
Injection pressure-Max. | kgf/cm2 | 2500 | 2127 | ||
Holding pressure-Max. | kgf/cm2 | 2125 | 1808 | ||
Screw stroke | mm | 90 | |||
Screw speed | rpm | 375 | |||
Calculated Nozzle contact force | ton | 1 | |||
Clamping unit | |||||
Clamping force | ton | 50 | |||
Clamp stroke - Max. | mm | 270 | |||
Mold thickness Min.~Max. | mm | 150-350 | |||
Open daylight - Max. | mm | 620 | |||
Tie-Bar distance (H×V) | mm | 360×310 | |||
Platen dimensions (H×V) | mm | 505×502 | |||
Ejector stroke | mm | 70 | |||
Ejector force | ton | 2 | |||
Dry. Cycle time | sec. | 1.8 | |||
General | |||||
Total Heating wattage | kw | 4.64 | |||
Machine weight | ton | 2850 | |||
Machine size (L×W×H) | mm | 3528x1275x1528 | |||
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. |
English Specification
Model (SPI Platen Information)
|
VαIII-50C |
||||
---|---|---|---|---|---|
Injection unit | |||||
Screw dia. | in | 0.86 | 1.02 | ||
Calculated Injection Capacity | in3 | 2.1 | 2.9 | ||
Actual Shot weight - (PS) | g | 32 | 45 | ||
oz | 1.1 | 1.6 | |||
Plastizing capacity | g/s | 5.1 | 8.0 | ||
Screw L/D ratio | 23.6 | 20 | |||
MIRLE system | Standard | Injection rate | in3/s | 7.0 | 9.7 |
Injection speed | in/sec | 11.81 | |||
Long holding type | Injection rate | in3/s | 3.9 | 5.5 | |
Injection speed | in/sec | 6.69 | |||
Injection pressure-Max. | Psi | 35557 | 30252 | ||
Holding pressure-Max. | Psi | 30223 | 25715 | ||
Screw stroke | in | 3.54 | |||
Screw speed | rpm | 375 | |||
Calculated Nozzle contact force | U.S. ton | 1.1 | |||
Clamping unit | |||||
Clamping force | U.S. ton | 55 | |||
Clamp stroke - Max. | in | 10.62 | |||
Mold thickness Min.~Max. | in | 5.9-13.77 | |||
Open daylight - Max. | in | 24.4 | |||
Tie-Bar distance (H×V) | in | 14.17×12.2 | |||
Platen dimensions (H×V) | in | 19.88×19.76 | |||
Ejector stroke | in | 2.75 | |||
Ejector force | ton | 2 | |||
Dry. Cycle time | sec. | 1.8 | |||
General | |||||
Total Heating wattage | kw | 4.64 | |||
Machine weight | U.S. ton | 3141 | |||
Machine size (L×W×H) | in | 138.89x50.19x60.15 | |||
※ Due to continual improvements, specifications technical information and dimensions are subject to change without prior notice. |