Model (Euromap Platen Information) |
VR-450E |
||||
---|---|---|---|---|---|
Injection Unit |
|||||
Calculated injection capacity | cm3 | 570 | 678 | 871 | |
Actual shot weight - PS | grams | 534 | 636 | 817 | |
Actual shot weight - PS | oz | 18.9 | 22.4 | 28.8 | |
Calculated Plasticizing Capacity - PS | g/s | 52 | 65 | 87 | |
Injection pressure-Max. | kgf/cm2 | 1944 | 1633 | 1272 | |
Injection Rate | cm3/sec | 389 | 463 | 595 | |
Injection speed | mm/sec | 163 | |||
Screw diameter | mm | 55 | 60 | 68 | |
Screw L/D ratio ※(1) | 22 | 20 | 18 | ||
Max. Theoretical screw torque | N.m | 2212 | |||
Screw speed | rpm | 286 | |||
Screw stroke | mm | 240 | |||
Nozzle stroke | mm | 450 | |||
Nozzle contact force | ton | 7.4 | |||
Temperature control zones | no. | 4 | |||
Total heating wattage | Kw | 18.6 | |||
Clamping Unit |
|||||
Clamping force | ton | 450 | |||
Clamp stroke-Max. | mm | 760 | |||
Open daylight-Max. | mm | 1580 | |||
Mold thickness (Min-Max.) | mm | 300-820 | |||
Platen dimension (H×V) | mm | 1200×1200 | |||
Tie-bar distance(H×V) | mm | 780×780 | |||
Ejector stroke | mm | 180 | |||
Ejector force | ton | 9.9 | |||
Dry cycle time | sec | 4.1 | |||
General |
|||||
Motor power (Standard) | HP(Kw) | 60(44.4) | |||
Servo motor power (ES Option) Max. Flow | Kw | 18 + 22.5 | |||
Oil tank capacity (Standard) | L | 960 | |||
Oil tank capacity (ES system Option) | L | 750 | |||
Hydraulic sys. pressure | Kg/cm2 | 160 | |||
Machine Weight | ton | 21 | |||
Machine dimensions (Standard) | mm | 8385x2050x2353 | |||
Machine dimensions (ES System option) | mm | 8745×2050×2353 | |||
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(*20), 20(*22), 22(*24)) Optional special for houshold produce. |
Model (SPI Platen Information) |
VR-450E |
||||
---|---|---|---|---|---|
Injection Unit | |||||
Calculated injection capacity | in3 | 34.78 | 41.37 | 53.15 | |
Actual shot weight - PS | grams | 534 | 636 | 817 | |
Actual shot weight - PS | oz | 18.9 | 22.4 | 28.8 | |
Calculated Plasticizing Capacity - PS | g/s | 52 | 65 | 87 | |
Injection pressure-Max. | kgf/in2 | 27649 | 23226 | 18091 | |
Injection Rate | in3/sec | 23.73 | 28.25 | 36.31 | |
Injection speed | in/sec | 6.41 | |||
Screw diameter | in | 2.16 | 2.36 | 2.67 | |
Screw L/D ratio ※(1) | 22 | 20 | 18 | ||
Max. Theoretical screw torque | N.m | 2212 | |||
Screw speed | rpm | 286 | |||
Screw stroke | in | 9.44 | |||
Nozzle stroke | in | 17.71 | |||
Nozzle contact force | ton | 8.15 | |||
Temperature control zones | no. | 4 | |||
Total heating wattage | Kw | 18.6 | |||
Clamping Unit | |||||
Clamping force | ton | 496 | |||
Clamp stroke-Max. | in | 29.92 | |||
Open daylight-Max. | in | 62.2 | |||
Mold thickness (Min-Max.) | in | 11.8 - 32.2 | |||
Platen dimension (H×V) | in | 47.2 × 47.2 | |||
Tie-bar distance(H×V) | in | 30.7 × 30.7 | |||
Ejector stroke | in | 7 | |||
Ejector force | ton | 10.9 | |||
Dry cycle time | sec | 4.1 | |||
General | |||||
Motor power (Standard) | HP(Kw) | 60(44.4) | |||
Servo motor power (ES Option) Max. Flow | Kw | 18 + 22.5 | |||
Oil tank capacity (Standard) | L | 960 | |||
Oil tank capacity (ES system Option) | L | 750 | |||
Hydraulic sys. pressure | Kg/in2 | 2275 | |||
Machine Weight | ton | 23.1 | |||
Machine dimensions (Standard) | in | 330.1×80.7×92.6 | |||
Machine dimensions (ES System option) | in | 344.3×80.7×92.6 | |||
Notes: Due to continual improvements, specifications technical imformation and dimensions are subject to change without prior notice. ※(1) Screw L/D rate (18(*20), 20(*22), 22(*24)) Optional special for houshold produce. |